Your new Keyless Entry must be programmed to operate your garage door opener.

Program using the "Learn" Button

Press and release the "learn" button on the motor unit. The learn indicator light will glow steadily for 30 seconds.

Within 30 seconds, enter a four digit personal identification number (PIN) of your choice on the keypad. Then press and hold the ENTER button. Release the button when the motor unit lights blink. It has learned the code. If light bulbs are not installed, two clicks will be heard.

Program using the Multi-Function Door Control

NOTE: This method requires two people if the Keyless Entry is already mounted outside the garage.

Enter a four digit personal identification number (PIN) of your choice on the keypad. Then press and hold ENTER.

While holding the ENTER button, press and hold the LIGHT button on the Multi-Function Door Control. Continue holding the ENTER and LIGHT buttons while you press the push bar on the Multi-Function Door Control (all three buttons are held).
Release buttons when the motor unit lights blink. It has learned the code. If light bulbs are not installed, two clicks will be heard.
Change an Existing, Known PIN

If the existing PIN is known, it may be changed by one person without using a ladder.

Press the four buttons for the present PIN, then press and hold the # button. The opener light will blink twice. Release the # button.
Press the new 4-digit PIN you have chosen, then press ENTER.
The motor unit lights will blink once when the PIN has been learned.

Test by pressing the new PIN, then press ENTER. The door should move.

Set a Temporary PIN

You may authorize access by visitors or service people with a temporary 4-digit PIN. After a programmed number of hours or number of accesses, this temporary PIN expires and will no longer open the door. It can be used to close the door even after it has expired. To set a temporary PIN:

Press the four buttons for your personal entry PIN (not the last temporary PIN), then press and hold the * button. The opener light will blink three times. Release the button. Press the temporary 4-digit PIN you have chosen, then press ENTER. The opener light will blink four times. To set the number of hours this temporary PIN will work, press the number of hours (up to 255), then press *. OR To set the number of times this temporary PIN will work, press the number of times (up to 255), then press #. The opener light will blink once when the temporary PIN has been learned. Test by pressing the four buttons for the temporary PIN, then press ENTER. The door should move. If the temporary PIN was set to a certain number of openings, remember that the test has used up one opening. To clear the temporary PIN, repeat steps 1-3, setting the number of hours or times to 0 in step 3.

One Button Close

The opener can be closed by pressing only the ENTER button if the one button close feature has been activated. This feature has been activated at the factory. To activate or deactivate this feature press and hold buttons 1 and 9 for 10 seconds. The keypad will blink twice when the one button close is active. The keypad will blink four times when the one button close is deactivated.

Click here to see a video about how to program a keyless entry to a garage door.

In case you are looking for a garage door installation, Contact us at 612-400-9295 for a free on-site estimate! Our experts will answer all your questions related to garage door installation.